EasyManuals Logo

Suzuki DF20A User Manual

Suzuki DF20A
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22
THROTTLE TENSION ADJUSTMENT
TILLER HANDLE MODEL
The tension of the throttle control grip can be
adjusted according to your preference. To
increase the tension, turn the throttle tension
adjuster A clockwise. To decrease the tension,
turn the adjuster counterclockwise.
REMOTE CONTROL MODEL
The tension of the remote control handle can be
adjusted according to your preference. To
increase the tension, turn the throttle tension
adjuster A clockwise. To decrease the tension,
turn the adjuster counterclockwise.
IDLE SPEED ADJUSTMENT
The idle speed has been factory adjusted
between 800 – 900 r/min. in neutral.
NOTE:
If idle speed cannot be set within the specified
range, contact your authorized Suzuki Marine
Dealer.
CAUTION SYSTEM
The caution systems are designed to alert you
to certain situations which may cause damage
to your outboard motor.
Caution lamp check
TILLER HANDLE MODEL
Each time the starter system is operated, the
caution lamp will light briefly for the first two
seconds, regardless of the motor condition.
NOTICE
Your outboard motor may become damaged if
you rely on the Caution System to alert you to
any malfunction that may occur or to give you
an indication of the need for maintenance.
To avoid damage to your outboard motor, reg-
ularly inspect and maintain it.
NOTICE
Continuing to operate your outboard motor
with the Caution System activated can result
in severe damage to your outboard motor.
If the Caution System activates while you are
operating your outboard motor, stop the
motor as soon as possible and correct the
problem or consult your authorized Suzuki
marine dealer for assistance.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Suzuki DF20A and is the answer not in the manual?

Suzuki DF20A Specifications

General IconGeneral
Displacement327 cc
Bore x Stroke60.4 mm x 57 mm
Maximum Output14.7 kW (20 PS)
Max Power20 HP
Ignition SystemDigital CDI
SteeringTiller
Gear Ratio2.08:1
Alternator Output12V 12A
Engine Type4-stroke
Starting SystemElectric / Manual
Weight44 kg
Fuel SystemElectronic Fuel Injection
Oil Capacity1.0 L
Fuel Tank Capacity12 L
Shaft Length381 mm (short shaft), 508 mm (long shaft)
Full Throttle RPM Range5300 - 6300 RPM

Related product manuals