3-23
SUSPENSION ADJUSTMENT
The standard settings for both the
front and rear suspensions are
selected to meet various riding
conditions such as low to high
motorcycle speed and light to
heavy load on the motorcycle.
The suspension settings can be
adjusted to fine-tune then accord-
ing to your preference.
FRONT SUSPENSION
Spring Pre-load Adjustment
To change the spring pre-load,
turn the adjuster 1 clockwise or
counterclockwise. Turning the
adjuster clockwise will increase
the spring pre-load. Turning the
adjuster counterclockwise will
decrease the spring pre-load.
There are four grooved lines on
the side of the adjuster 1 for ref-
erence. Position 5 provides the
minimum spring pre-load and
position 0 provides the maximum
pre-load. This motorcycle is deliv-
ered from the factory with its
adjuster set on position 3.
A Position 0
B Position 3
C Position 5
WARNING
Unequal suspension adjust-
ment can cause poor handling
and loss of stability.
Adjust the right and left front
forks to the same settings.
0
1
2
3
4
5
0
1
2
3
0
To Next Page
Loading...
Need help?
General
