7-38
LIGHT BULB REPLACEMENT
The wattage rating of each bulb is
shown in the following chart.
When replacing a burned out
bulb, always use the same watt-
age rating.
WARNING
Failure to extend brake pads
after installing the wheel can
cause poor braking perfor-
mance and may result in an
accident.
Before riding, “pump” the
brake repeatedly until brake
pads are pressed against the
brake disks and proper pedal
stroke and firm feel are
restored. Also check that the
wheel rotates freely.
CAUTION
Using a light bulb with the
wrong wattage rating can
cause electrical system dam-
age or shorten bulb life.
Always use the specified light
bulb.
Headlight 12V 60/55W (H4) × 2
Turn signal light 12V 21W × 4
Brake light/Taillight 12V 21/5W × 2
License plate light 12V 5W
To Next Page
Loading...
Need help?
General
