7-36
Front axle tightening torque:
100 N·m (10.0 kgf-m, 72.5 lbf-ft)
Front axle holder bolt tightening
torque:
23 N·m (2.3 kgf-m, 16.5 lbf-ft)
Front brake caliper mounting bolt
tightening torque:
39 N·m (3.9 kgf-m, 28.0 lbf-ft)
REAR WHEEL REMOVAL
1. Place the motorcycle on the
side stand.
2. Remove the axle nut 1.
3. Place an accessory service
stand or equivalent under the
swing arm to lift the rear wheel
slightly off the ground.
4. Loosen the lock nut 2 (right
and left). Turn the chain adjust-
ing bolts 3 clockwise (right
and left).
WARNING
A hot muffler can burn you. The
muffler will be hot enough to
burn you for some time after
stopping the engine.
Wait until the muffler cools to
avoid burns.
To Next Page
Loading...
Need help?
General
