7-31
INSPECTION AND MAINTENANCE
60MK0-14E
60MH054
2) Close the tailgate. Release the claws
(3) of the light housing by a flat blade
screwdriver, etc. The claws are shown
in the next illustration. Remove a high-
mount stop light housing (2) from the
tailgate.
60MH070
3) Remove the each bulb.
4) Replace the bulbs.
To install a high-mounted stop light
housing in the reverse order of removal.
Wiper Blades
54G129
If the wiper blades become brittle or dam-
aged, or make streaks when wiping,
replace the wiper blades.
To install new wiper blades, follow the pro-
cedures below.
NOTE:
Some wiper blades may be different from
the ones described here depending on
vehicle specifications. If so, consult your
SUZUKI dealer for proper replacement
method.
(2)
(3)
EXAMPLE
(3)
NOTICE
To avoid scratching or breaking the
window, do not let the wiper arm
strike the window while replacing the
wiper blade.
To Next Page
Loading...
Need help?
General
