2-1
BEFORE DRIVING
78RB1-01E
Keys
54G489
Your vehicle comes with a pair of identical
keys. Keep one of the keys as a spare key
in a safe place. One key can open all of the
locks on the vehicle.
The key identification number is stamped
on a metal tag provided with the keys or on
the keys. Keep the tag in a safe place. If
you lose your keys, you will need this num-
ber to have new keys made. Write the
number below for your future reference.
Immobilizer system
This system is designed to help prevent
vehicle theft by electronically disabling the
engine starting system.
The engine can be started only with your
vehicle’s original immobilizer ignition key,
which has an electronic identification code
programmed in it. The key communicates
the identification code to the vehicle when
the ignition switch is turned to “ON” posi-
tion. If you need to make spare keys, see a
SUZUKI dealer. The vehicle must be pro-
grammed with the correct identification
code for the spare. A key made by an ordi-
nary locksmith will not work.
80JM122
If the immobilizer warning light blinks when
the ignition switch is in “ON” position, the
engine will not start.
NOTE:
• If the immobilizer system warning light
blinks or comes on, a message may be
shown on the information display.
• This immobilizer system is maintenance-
free.
If this light blinks, turn the ignition switch to
“LOCK” position, and then turn it back to
“ON” position.
If the light still blinks after the ignition
switch is turned back to “ON” position,
there may be something wrong with your
key or with the immobilizer system. Ask a
SUZUKI dealer to have the system
inspected.
KEY NUMBER:
NOTICE
Do not modify or remove the immobi-
lizer system. If modified or removed,
the system cannot be properly oper-
ated.
To Next Page
Loading...
Need help?
General
