21
BABY GRAND DIGITAL PIANO
User Dened Quick Selection Button - These Buttons allow the User to select and
store their favorite voices in these buttons, in order to easily select them the next
time they use the piano.
Press the voice USER button, USER 1 from Line A, or USER 2 from Line B to select
the user dened voice. The default user voice for USER 1 is voice 012 Vibraphone.
The default user voice for USER 2 is voice 092 Choir Pad.
You can assign a favorite voice to the voice quick select button by following the
steps below:
1. Select USER BUTTON A or USER BUTTON B.
2. Press and hold down the USER button to assign the voice for 3 seconds, the
indicator of the button will blink.
3. Select the desired voice by using the +, – buttons.
4. Press the USER button again to store the voice. The indicator remains On.
The currently selected voice will be assigned to this button to be available for quick
selection button next time you press it.
5. USER button assignment will be saved even when the power is turned o.
Layer (Dual) Voice - Layer, or dual, refers to an additional voice that is tone mixed
with the selected keyboard voice. The assigned layer voice will be heard with the
original voice when the layer feature is engaged.
1. Press the LAYER button, the engagement bar underneath the Layer icon and the
layer voice number above the icon will blink. The current layer voice number and
name will also show on the top row of the display with the “VOICE“ indicator in
front. The layer voice feature is engaged.
049: Strings1
Layerv oice
number
Layer icon
Engagement Bar
2. Use the +, – buttons to select the desired d voice that you want.
3. Press the LAYER button a second time within 3 seconds and the current layer voice
volume will be show on the display. Use the +, – buttons to adjust the layer voice
volume ranging 0 - 127. Press the + and - buttons simultaneously to revert its
default volume.
086: LayerVol
4. After three seconds the display will revert to the selected main voice. The Layer
icon will then stop blinking.
5. Press the LAYER button again to turn the layer voice feature o. The engagement
bar of the Layer icon will then turn o.
3
Se
c
o
n
d
s
2ndT ime
To Next Page
Loading...
Need help?
General
