44
OWNER’S MANUAL
Factory Setting - This function will reset the piano back to its factory default
setting.
1. In the Setup mode press the UP or the DOWN buttons until the “Reset“ appears on
the LCD Display.
Reset
2. Press the ENTER button to conrm this, Its current setting will be shown and blink.
no:Reset
3. Use the +, – buttons to select “Yes“ or “No“.
4. If “Yes“ is selected and conrmed by pressing the ENTER button, the LCD Display
will ask “Sure?“. Press the ENTER button again to conrm this or press the CANCEL
button to cancel to leave this operation.
Sure?
Registration Memory
Registration Memory can recall particular settings of style, voice and other parameters or features you
have engaged. This piano has ten registration memories to hold your favorite settings so that they can
be recalled quickly by pressing a button. Your registration memories will not be lost when the power is
turned o.
Save Your Settings In The Registration Memory
1. Set the voice, rhythm, tempo, accompaniment, reverb eect and any other
parameters that you wish to save.
2. Press and hold down the USER REG button for 3 seconds. The current registration
memory number is blinking.
3:Regist
3. Use the +, - buttons to select the registration memory 1 -10 you desire to save the
settings. Press the ENTER button to conrm. Your setting will be saved into that
registration memory instantly. The operation mode reverts to the voice selection
and the engagement bar underneath the Registration icon disappears.
Recall Contents In The Registration Memory
1. Press and release the USER REG button to engage the registration memory mode,
the engagement bar underneath the Registration Icon will appear. The current
registration memory number will show above the icon. You can see the parameters
such as voice, style, tempo etc updating on the display.
049: Strings1
main voice setting in the Registration Memory
3 Seconds
To Next Page
Loading...
Need help?
General
