48
OWNER’S MANUAL
By connecting this Suzuki piano to another piano in this way you can essentially
play two instruments at the same time or play on your piano to the sound of
another MIDI devise to produce thick, layered multi–instrument sounds.
Output from an external MIDI device – Connect the MIDI In terminal of the piano
and the MIDI Out terminal of an external device. Data generated on another device
are passed through your pianos sound delivery system.
Connect with an computer – Although the Suzuki piano oers a built in
sequencer, the music recorder is a real–time ve track sequencer, the same type
of musical information transfer that is described above can be used for more
sophisticated MIDI sequence recording using an external sequencer or computer.
These devices can be used to record MIDI data received from this piano. You
can transmit your performance to a computer to utilized advanced recording,
composing and editing available from software on the computer. MIDI music
stored on the computer can be played back through your instrument.
MIDI Local Control Mode – Local control refers to the fact that normally, this
Suzuki piano controls the internal tone generator. This is the normal play mode.
Local control can be turned o, so that the piano does not play the internal voices,
however, the MIDI information is still transmitted via the MIDI Out connector when
notes are played on the piano. At the same time, the internal tone generator can
respond to MIDI data received via the MIDI In connector.
MIDI Input Channel Selection – You may select an individual MIDI channel to
receive MIDI data on. The power up default setting is the OMNI mode which
receives MIDI data on all channels.
MIDI Split Input Lower Channel Mode – This MIDI input channel mode is used to
select which MIDI input channel you want to receive for the lower split piano MIDI
data. The previous MIDI input mode will receive the upper split piano data.
MIDI Output Channel Selection – You may select an individual MIDI channel
to transmit MIDI data on. The power up default setting to transmit MIDI data is
channel 1.
MIDI Slit Output Lower Channel Mode – This MIDI output channel mode is used
to select which MIDI output channel that you want to transmit on for the lower
split piano data. This MIDI data can be sent separately on a discrete MIDI channel.
The previous MIDI input mode will transmit the upper split piano data. The default
setting for this mode transmits on channel two.
To Next Page
Loading...
Need help?
General
