7-37
FRONT WHEEL REMOVAL
1. Place the motorcycle on the
side stand.
2. Remove both brake calipers
from the front forks by remov-
ing two mounting bolts 1 on
each of the caliper.
NOTE: Never squeeze the front
brake lever with the caliper
removed. It is very difficult to force
the pads back into the caliper
assembly and brake fluid leakage
may result.
WARNING
If the side stand/ignition inter-
lock system is not working
properly, it is possible to ride
the motorcycle with the side
stand in the down position.
This may interfere with rider
control during a left turn.
Check the side stand/ignition
interlock system for proper
operation before riding. Check
that the side stand is returned
to its full up position before
starting off.
To Next Page
Loading...
Need help?
General
