3-20
SEAT LOCK
To remove the seat, insert the
ignition key into the lock and turn
it clockwise. Raise the rear end of
the seat and slide it backward.
To reinstall the seat, slide the seat
hooks into the seat hook retainers
and push down firmly until the
seat snaps into the locked posi-
tion.
A small and light article such as
rain gear or a windbreaker can be
placed under the seat.
Loading limit: 2 kg (4.5 lbs)
HELMET HOLDER
Use helmet holder wire as shown
to hook the helmet.
WARNING
Failure to install the seat prop-
erly could allow the seat to
move and cause loss of rider
control.
Latch the seat securely in its
proper position.
WARNING
Riding with a helmet fastened
to the helmet holder can inter-
fere with rider control.
Never carry a helmet fastened
to a helmet holder. Fix the hel-
met securely atop the seat if
you must carry it.
To Next Page
Loading...
Need help?
General
