7-42
LIGHT BULB REPLACEMENT
The wattage rating of each bulb is
shown in the following chart.
When replacing a burned out
bulb, always use the same watt-
age rating.
Headlight
1. Disconnect the socket 1 from
the headlight and remove the
rubber cap 2.
2. Unhook the bulb holder spring
3 and pull out the bulb 4.
CAUTION
Using a light bulb with the
wrong wattage rating can
cause electrical system dam-
age or shorten bulb life.
Always use the specified light
bulb.
Headlight 12V 60/55W × 2 (H4)
Turn signal light 12V 21W
Brake light/Taillight 12V 21/5W × 2
License plate light 12V 5W
CAUTION
Oil from your skin may damage
the headlight bulb or shorten
its life.
Grasp the new bulb with a
clean cloth.
To Next Page
Loading...
Need help?
General
