7-21
THROTTLE CABLE PLAY
This motorcycle has a twin throttle
cable system. Cable A is for pull-
ing and cable B is for returning.
To adjust the cable play:
1. Loosen the lock nut 1.
2. Turn in the adjuster 2 fully.
3. Loosen the lock nut 3.
4. Turn the adjuster 4 so that the
throttle grip has 2.0 – 4.0 mm
(0.08 – 0.16 in) play.
5. Tighten the lock nut 3.
6. While holding the throttle grip
at the closed position, turn out
the adjuster 2 to feel resis-
tance.
7. Tighten the lock nut 1.
2.0–4.0 mm
(0.08–0.16 in)
WARNING
Inadequate throttle cable play
can cause engine speed to rise
suddenly when you turn the
handlebar. This can lead to
loss of rider control.
Adjust the throttle cable play
so that engine idle speed does
not rise due to handlebar
movement.
To Next Page
Loading...
Need help?
General
