5
This sticker warns against high voltage, electric shock and burn.
1) Only professional technicians should open any covers marked with this sticker.
2) Wait four minutes after turning the main switch to OFF before opening the cover.
TROUBLESHOOTING
Covers in the warning stickers refer to all covers near operating parts of the machine.
CONTENTS OF WARNING STICKERS
1) Before cleaning or repairing the machine, turn off the main power and wait for four minutes so that the
machine electricity is completely discharged. NOTE : When doing any routine troubleshooting, be aware
that it takes about10 minutes after turning off the main switch before the electricity is fully discharged
from the X/Y main shafts and drive box.
2) DO NOT change the settings or any parts on the machine without confirmation from SWF or its
distributors.
3) Use ONLY SWF parts on your machine.
4) Be sure to replace all covers when you are finished with your cleaning or repairs.
WARNING
· Injury may be caused by winding.
·
Be sure to check that safety cover
is closed before running machine.
· Don’t put your hands near the
moving parts while machine is
running.
WARNING
· Injury may be caused by
moving needle.
· Ensure that the machine is in a
stop condition before changing,
threading or rethreading of
needle or changing of needles.
DANGER
If you should have any problems with your new machine, contact the A/S
Engineers at your SWF dealership. They are trained at SWF training centers
and are ready and able to assist you.
To Next Page
Loading...
Need help?
General
