7
INSTALLATION AND MACHINE ASSEMBLY
CHAPTER 2
Install you machine in an appropriate environment and with adequate and proper electrical supply.
Failure to follow directions may result in injury to the operator or damage to the machine.
ENVIRONMENT
1) Temperature : During machine operation the temperature should range between 0 and 40 degrees
Celsius(32-104 degrees Fahrenheit). When the machine is not in operation the temperature should fall
between-25 and 55 degrees Celsius(-13 and 131 degrees Fahrenheit).
2) Humidity : The relative humidity should fall between 45 and 90%
3) Height: 1,000m above sea (max)
4) Grounding: Ensure the electricity is properly grounded.
5) Light : Close any doors and windows near the machine to protect from direct light as well as dust and
humidity.
6) Placement : Place the machine on a flat concrete floor that is strong enough to sustain the weight.
CAUTION
Do not let moisture drops on the machine.
Provide air conditioning to control humidity and to prevent dust and corrosion.
DANGER
Properly ground the machine to avoid electric shock. Use a three-wire grounding
(grounding resistance below 100 ohms).
To Next Page
Loading...
Need help?
General
