17
FUNCTIONS AND FEATURES
1) EXPANDED MEMORY SIZE.
A maximum of 100 designs can be stored in your machine. The basic memory size is approximately
500,000 stitches. This can be expanded to two million stitches.
2) MIRROR IMAGE CONVERSION AND DESIGN DIRECTION
You can turn the design from one degree to 359 degrees. Your machine is also capable of mirror
conversion, reversing the design in the X and Y direction.
3) ENLARGING AND REDUCING THE DESIGN
The embroidery design can be reduced or enlarged in size from 50% to 200% along the X and Y axis in
increments of 1%.
4) AUTOMATIC SELECTION OF NEEDLE BAR
You can select the order of the needle bars up to the 99th bar.
5) REPETITION OF DESIGNS
The same design can be repeated up to 99 times along the X and Y axis.
6) AUTOMATIC OFFSET
When the embroidery design is finished stitching, the frame automatically returns to the offset point to
make it easier to switch the frames.
7) MANUAL OFFSET
Appliques and switching frames during embroidery work is easier because the frame can be moved
manually to a point selected beforehand. After that, the frame can be moved back to its place by
pressing the proper keys.
8) RETURN TO START
The frame can be moved back to the beginning point of the design.
9) NON-STITCHING FUNCTION
The frame can be moved backward and forward in units of 1,100,1,000 and 10,000 stitches. The needle
bar can also be moved backward and forward by color without stitching.
10) FRAME REVERSAL
When the thread breaks or the needle becomes unthreaded, the frame can be moved in units of one to
ten stitches back to the beginning point of the design.
CHAPTER 4
To Next Page
Loading...
Need help?
General
