EasyManuals Logo
Home>Sym>Scooter>JET 100 series

Sym JET 100 series User Manual

Sym JET 100 series
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
24
10.Inspection and maintenance before riding
CAUTION:
! This is a closed type battery. Never remove the caps.
! In order to prevent electric leakage and self-discharge when the battery sits idle for long periods.
Remove battery from scooter, store it in a well- ventilated and dimly lighted place after the battery
has been fully charged. Disconnect battery’s negative cable if the battery is still kept on the scooter.
! If the battery needs to be replaced, replace with a same closed-type battery (Maintenance-Free).
TIRE INSPECTION
! Tires should be checked and inflated with the engine shut off.
! If a tire’s ground contacting curve is abnormal, check it with an air pressure gauge and inflate it to the
specified pressure.
! Tires pressure must be checked with an air pressure gauge when cold.
PLEASE REFER TO SPECIFICATIONS FOR STANDARD TIRE PRESSURE
! Visual check tires for frontal and lateral side walls for crack or damage.
! Visual check tires for any nails or small stones wedged in the tread.
! Check the “tread wear indicator” condition to see if tread groove depth is insufficient.
! A tire with a wear bar showing is worn out and should be replaced immediately.
CAUTION:
Abnormal tire pressure, wear, or crack is the most important cause that results in the loss control of the
steering handle and a punctured tire(s).
Tread wear indicator
Crack and damage
Foreign materials (nails or small stones)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sym JET 100 series and is the answer not in the manual?

Sym JET 100 series Specifications

General IconGeneral
BrandSym
ModelJET 100 series
CategoryScooter
LanguageEnglish

Related product manuals