Sym MaxSym 600i ABS User Manual

10
7. Use of each component
USE OF BUTTONS
Light Switch
When the switch is turned to this position, headlight, position light, rear light, and panel light will
come on.
When the switch is turned to this position, position light, rear light, and panel light will come on.
Hazard Switch
When the switch is turned to this position, all lights will go off.
The main switch in the〝 ON 〞 position, cuts according to this switch, four directions lantern festivals
dodge extinguish do move, also can simultaneously dodge on the display board direction indicating
lamp extinguishes does moves. If stops the vehicle has when the transportation frequent dangerous
position or the vehicle the breakdown, may use the dangerous police to show the switch.
 Engine Stop Switch
Switch to this position to turn off the engine when a state of emergency.
Switch to this position and the engine can be started.
 Seat open Switch
Turn ignition switch “ON” and press this button down. Then, the seat will unlock immediately.
This button will return to original position after releasing.
CAUTION:
Make sure to take the key away with you before you lock your seat.
Light Switch
Electrical
Starter Button
High/Low Beam
Switch
Turn Signal Switch
Horn Switch
Passing switch
Engine Stop
Switch
Seat Open switch
Hazard Switch

Sym MaxSym 600i ABS Specifications

General

Brand	Sym
Model	MaxSym 600i ABS
Category	Scooter
Language	English