EasyManuals Logo
Home>Sym>Scooter>MaxSym 600i ABS

Sym MaxSym 600i ABS User Manual

Sym MaxSym 600i ABS
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
28
10. Inspection and maintenance before riding
CAUTION:
Use soft water when mixing coolant.
Please pay special attention that using poor quality coolant may shorten the service life of the
radiator.
Coolant should be changed once a year normally.
CAUTION:
Please refer to a table showing what percentage of anti-freeze should be used under different
temperatures if the vehicle is to be operated in the low temperature areas. (below 0)
A reference table for anti-freeze concentration percentages under different temperatures
1. Radiator anti-freeze specification for this scooter is H68. (SYM Bramax radiator agent)
2. Proper anti-freeze percentages for different frozen temperatures are as follows:
Anti-freeze percentage
Frozen temperature
Remark
20%
-8
50% concentration is used
for all scooters before
delivery to ensure the
effectiveness of
anti-freeze.
30%
-15
40%
-24
50%
-36
3. If the specified anti-freeze is unavailable, use an equivalent with the same high quality.
4. Increase radiator maintenance intervals when the weather is extremely cold.
CRANKCASE BLOW-BY VENTILATION
Pull out the plug from draining hose to clean deposits
CAUTION:
When always riding in rainy area or full throttle position, maintenance travel must be shorted. The
deposits can be seen in the transparent section of draining hose.
Blow-by hose

Table of Contents

Other manuals for Sym MaxSym 600i ABS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sym MaxSym 600i ABS and is the answer not in the manual?

Sym MaxSym 600i ABS Specifications

General IconGeneral
BrandSym
ModelMaxSym 600i ABS
CategoryScooter
LanguageEnglish

Related product manuals