7
§OPERATION OF IGNITION SWITCH §
“ON” position:
Engine can be started in this position.
Ignition switch key can not be removed.
“OFF” position:
Engine is shut off and can not be started in this position .
Ignition switch key can be removed.
§OPERATION OF STEERING HANDLE LOCK SWITCH §
“Steering handle lock” position
Turn the steering handle to left and insert the key into,
press ignition switch key clockwise and then lightly turn
it to left to the “lock” position.
The steering handle is locked in this position.
Ignition switch key can be removed.
When unlocking, simply turn the key from the “LOCK”
position to the “OFF” position.
§OPERATION OF FUEL TANK CAP SWITCH§
“Fuel tank cap open” position：
How to open：Insert your key into the ignition switch, and turn it to the right.
How to lock：Push the fuel tank cap and it locks automatically
§OPERATION OF IGNITION§
“OPEN” position:
The keyhole baffle can be moved to open by turning the “open “after contact and pointing at the
magnet switch keyhole
“SHUT” position:
Directly press the black button next to the “shut “button and the keyhole shutter can be closed by
automatically popping the keyhole baffle.
MAGNETITE KEY：
Insert your magnetite key into the magnetite keyhole, and turn it to right ignition keyhole block
board can be to open.
When close ignition keyhole. You just push the Ignition keyhole block board push rod, and ignition
keyhole can be to close.
To Next Page
Loading...
Need help?
General
