13.4 Röräkt RVK-EX
s
EG- intyg om överensstämmelse
EC Declaration of Conformity
Tillverkaren: / Systemair GmbH
The Manufacturer Seehöfer Str. 45
D-97944 Windischbuch
Tel.: +49-79 30 / 92 72-0
intygar härmed för följande produkt: /
certied herewith that the following products:
• Röräktförexplosivmiljö,Ex-skyddsgradhöjdsäkerhet“e”, zon1och2,kategori2G,explosionsgruppIIBserieRVK-EX (e);
•
Circular duct fans for explosion-hazardous areas, type of protection increased safety “e”, zone 1 and 2, category 2G of
explosion group IIB of range RVK-EX (e);
Fråntillverkningsår: / Since year of manufacture: 2014
EnligtmaskindirektivRL2006/42/EGochdirektiv94/9/EG.
ensure all relavant regulations of machinery directive RL 2006/42/EG and directive 94/9/EG.
Produkternaföljergällandekraviföljandedirektiv;elektrisktutrustning(2006/95/EG),elektromagnetiskkompabilitet
(EMC)(2004/108/EG)ochRoHs2011/65/EU.
The products ensure furthermore all regulations of directives electrical equipment (2006/95/EG), electromagnetic compatibility (EMC)
(2004/108/EG) and RoHS-directive 2011/65/EU.
Provningsinstitutets namn, adress och nummer: /
Name, address and identication no. of the technical institute (for prototype testing):
ZELM Ex e. K. Prüf- und Zertizierungsstelle
Siekgraben56
D-38124Braunschweig
Provningsinstitutetsnummer:/
Registration-no.: 0820
Certikatnrförprototypprovningsintyget/Inspection certicate no. of EC-type-examination certicate
(ZELM 03 ATEX 0198X)
Följande harmoniserade standarder tillämpas: /
The following standards are used:
DINEN14986:2007 Konstruktionaväktarförexplosionsfarligmiljö/
Design of fans working in potentially explosive atmospheres
DINEN13463-1:2009 Ickeelektriskutrustningavseddföranvändningiexplosivatmosfär-del1:Grundläg-gande
metoderochkrav/
Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and
requirements
DINEN13463-5:2011 Ickeelektriskutrustningavseddföranvändningiexplosivatmosfärdel5:Säkerkon-struktion“c“/
Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by
constructional safety „c“
DINEN1127-1:2011 Explosivatmosfär-explosionsskydd-del1:Grundläggandebegreppochmetodik/
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
DINEN60079-0:2009 Explosivatmosfär- del0:Utrustning–Allmännafordringar/
Explosive atmospheres - Part 0: Equipment – General requirements
DINEN60079-7:2007 Explosivatmosfär-del7:Utförandemedhöjdsäkerhet“e“/
Explosive atmospheres - Part 7: Equipment protection by increased safety „e“
DINEN60204-1:2006 Maskinsäkerhet–Maskinerselutrustning- del1:Allmännafordringar/
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
Boxberg,
30.12.2013
Datum/date ppa.HaraldRudelgass,Tekniskchef/ppa.HaraldRudelgass,Technicaldirector
106