6
Original document
GB IE
Declaration of Conformity
Manufacturer
Systemair AB
Industrivägen 3
SE-73930 Skinnskatteberg SWEDEN
Office: +46 222 440 00 Fax: +46 222 440 99
www.systemair.com
Hereby confirms that the following products:
Duct fans with circular connection: Duct fans with rectangular connection: Radial fans:
Ex 140 - 2, - 2C, - 4, - 4C
(SP03ATEX3101x)
KTEX 50-25-4 (SP04ATEX3105x) DKEX 225-4 (SP04ATEX3106x)
Ex 180 - 4, - 4C (SP03ATEX3101x ) KTEX 50-30-4 (SP03ATEX3103x) DKEX 250-4 (SP03ATEX3104x)
KTEX 60-30-4 (SP04ATEX3107x) DKEX 280-4 (SP04ATEX3108x)
KTEX 60-35-4 (SP04ATEX3109x) DKEX 315-4 (SP04ATEX3110x)
KTEX 70-40-6 (SP04ATEX3111x) DKEX 355-6 (SP04ATEX3112x)
SP = Technical Research Institute of Sweden (National Testing) SE-501 Borås Sweden
(The declaration applies only to product in the condition it was delivered in and installed in the facility in
accordance with the included installation instructions. The insurance does not cover components that are added
or actions carried out subsequently on the product)
Comply with all applicable requirements in the following directives
ATEX Directive 94/9/EC Low Voltage Directive 2006/95/EC
Machinery Directive 2006/42/EC EMC Directive 2004/108/EC
The following harmonized standards are applied in applicable parts:
EN 50 014:1997 Electrical apparatus for potentially explosive atmospheres - General requirements
EN 50 019:2000 Electrical apparatus for potentially explosive atmospheres - Increased safety "e"
EN 1127-1 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and
methodology
EN 13463-1:2001 Non-electrical equipment for potentially explosive atmospheres - Part 1: Basic method and
requirements
EN ISO 12100-1 Safety of machinery – Basic concepts, general principles for design – Part 1: Basic
terminology, methodology
EN ISO 12100-2 Safety of machinery – Basic concepts, general principles for design – Part 2: Technical
principles
EN 14121-1:2007 Safety of machinery – Risk assessment – Part 1: Principles
EN 13857 Safety of machinery – Safety distances to prevent hazard zones being reached by upper or
lower limbs
EN 60 335-1 Household and similar electrical appliances – Safety Part 1: General requirements
EN 60 335-2-80 Household and similar electrical appliances – Safety – Part 2-80: Particular requirements for
fans
EN 50 106:2007 Safety of household and similar appliances – Particular rules for routine tests referring to
appliances under the scope of EN 60 335-1 and EN 60967
EN 61000-6-2 Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity for industrial
environments
EN 61000-6-3 Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission
standards for residential, commercial and light-industrial environments
Skinnskattberg 10-03-2011
Mats Sándor
Technical Director
To Next Page
Loading...
Need help?
General