SystemAir Topvex SC Series User Manual

16
| Installation
Remove middle door beams
8. Loosen the screws on the door beams (6 screws on front and 6 screws on the back) and remove the beams.
Remove the roof
9. Remove the cabling from the roof part.
10.Loosen and remove the 8 screws for the roof's outer beams.
11.Remove the roof.
Warning
The roof part is bulky, two person is needed.
12.For weight reduction; remove the upper partition wall (remove bunch band anchors for cabling).
214958 | A007

SystemAir Topvex SC Series Specifications

General

Brand	SystemAir
Model	Topvex SC Series
Category	Air Handlers
Language	English