Position
Description
1
Regulator E-28 WEB
2
Transformer 230/24V AC
3
Terminals for internal and external components
4
Terminals for internal wiring
5
Terminals for mains supply to the unit
6
Contactor (K2) Pump control water (HW units only, not present in EL-units)
7
Automatic fuse
8
Electric heater frame
9
Automatic fuse for heater
10
Contactor (K3) for control of EL heater
11
Thermostat (EL units)
12
Manual over heat protection reset (EL units)
3 Interface description
3.1 Control panel
The SCP control panel is delivered with a 10 m cable (up to 100 m can be used) that is connected to the panel and with
a fast coupling contact, connected to the Topvex unit. The contact is connected to the Corrigo controller in the electrical
connection box. The cable can be unscrewed in the back of the control panel (figure 5).
To Next Page
Loading...
Need help?
General
