Tait T 9100 Series Quick Start Guide

P25 Trunking Setup Quick Start Guide Configure Channels 10
© Tait International Limited May 2021
9 Configure Channels
1. To configure your channels, go to Channel Setup > Channels.
2. At the bottom of the screen, click “Add” to add the number of
additional channels you require.
Make sure to configure the channels with the P25 trunking profile, and
define a talkgroup for each channel. Refer to the profiles you selected
in previous steps.
Typically the “Label” is configured to match the talkgroup name. This
label will be displayed on the screen.
As soon as this basic template has been programmed, the radio will hunt
and attempt to acquire service on the system.
Ensure you are in coverage range when attempting to acquire service.

Tait T 9100 Series Specifications

General

Brand	Tait
Model	T 9100 Series
Category	Two-Way Radio
Language	English