Getting started 23
Understanding the radio display
The following table explains the messages you may see on
your radio display.
Message
Meaning
Antenna: there is a fault with your antenna. Check your
antenna, antenna type and cable connections.
Called party busy: the called party is engaged on another call or
does not accept your call
Conventional mode: you are currently operating on a
conventional channel (in this example, channel ID 01), or group
Call cancelled: the call has been cleared down before a traffic
channel is assigned
Callback: your call has reached the other party and they did not
answer, but their radio has stored a message to call you back
Data call: a data call is currently in progress
Call diversion: the call diversion feature is currently activated, or
your call has been diverted by the calling party
Do not disturb: the “do not disturb” feature is currently
activated
System error: your radio has encountered an error (in this
example, error 1)
Function not available: the function that you requested is not
available on this radio
Talkgroup list: the current item in the scrolling list is a talkgroup
(in this example, talkgroup1). Alternatively, your radio’s default
display is set to show the currently selected talkgroup
(talkgroup 1).
GPS: your radio is currently sending GPS location information
To Next Page
Loading...
Need help?
General
