38 Basic operation
Making a talkgroup call
To make a talkgroup call from your radio, you may be able to
either:
■ call the number from the default display, or
■ use a function key programmed for talkgroup select.
Calling the talkgroup from the default display
If the radio’s default display shows the currently selected
talkgroup, press the PTT to call that group.
It is not possible to call a scan group. A scan group has the
prefix SC before the number, for example, SC1.
While the call is being setup, you can cancel the call by
pressing the clear key .
Using a function key to make a talkgroup call
1 Press the function key programmed for talkgroup select.
The first of the available talkgroups
appears on the display.
2 Use the scroll keys or to
move through the talkgroup list.
It is not possible to call a scan group.
A scan group has the prefix SC before the
number, for example, SC1.
3 Press the PTT key to call the talkgroup.
While the call is being setup, you can cancel the call by
pressing the clear key .
To Next Page
Loading...
Need help?
General
