6 Preface TM9300/TM9400 Installation Guide
© Tait Limited December 2015
Publication Record
Document Conventions
Please follow exactly any instruction that appears in the text as an ‘alert’.
An alert provides necessary safety information as well as instruction in the
proper use of the product. This manual uses the following types of alert:
Warning This alert is used when there is a hazardous situation
which, if not avoided, could result in death or serious injury.
Caution This alert is used when there is a hazardous situation which,
if not avoided, could result in minor or moderate injury.
Notice This alert is used to highlight information that is required to
ensure procedures are performed correctly. Incorrectly performed pro-
cedures could result in equipment damage or malfunction.
This alert is used to highlight significant information that may be
required to ensure procedures are performed correctly, or draw your
attention to ways of doing things that can improve your efficiency or
effectiveness.
Within this manual, the following symbols are used to highlight differences
between radios with a transmit power of more than 25W and radios with a
transmit power of 25W:
This symbol highlights information that is relevant to radios with a transmit
power of 30-50W.
This symbol highlights information that is relevant to radios with a transmit
power of 25W.
Issue Publication Date Description
01 September 2012 First release.
02 December 2012 TM9400 added.
03 November 2013 Hand-held control head added
Caution about using Y-type breakout cable added
04 May 2014 Information added about using an analog
channel to check TM9300 forward and reflected
power
05 December 2015 Remote head extender upgrade kits added.
Component names to configure an external alert
device changed.
25W
To Next Page
Loading...
Need help?
General
