Operation 48
During scan, the LED flashes orange and the Scan
icon is displayed.
No-key no-display radio
■
Press the function key programmed to turn scan
on or off.
During scan, the LED flashes orange.
Making a call alert
16-key and 4-key radios
■ Press the function key programmed to make a call
alert to the predefined ID.
or
1 Press Menu and select Contacts > Contact List.
2 Scroll to required contact and press Select.
3 Select Ctrl Services and Call Alert.
or (for 16-key radio only)
1 Press Menu and select Contacts > Manual Dial.
2 Enter the subscriber ID you want to page and
press Confirm.
3 In the Ctrl Services menu
select Call Alert.
The display shows Call Alert and
the subscriber alias or ID, indicating
that the call alert has been sent.
The LED flashes red when your radio is sending the
call alert.
If the call alert acknowledgement is received, the
display briefly shows Success!
If the call alert acknowledgement is not received, the
display briefly shows Failed!
Select Back
Rad Check
Call Alert
R, Monitor
Rad Enable
Ctrl Services
To Next Page
Loading...
Need help?
General
