18
Cleaning the recovery tank
t Switch on the vacuum motor only now.
The indicators light up.
The soiled water is now pressed out of the recovery tank.
t Switch off the vacuum unit as soon the tank is empty.
Caution:
Now pull back the lever into the work position (page 5).
t Turn off the machine (main switch).
t Empty the recovery tank (Page 17).
t Open the machine hood.
t Remove the tank cover closing.
t Take off the tank cover/dosing cup.
t Remove the of the maintenance opening lid (page 5).
t Clean the recovery tank thoroughly.
Caution:
Danger of injury due to sharp objects
Wear cloves to protect your hands from injurys!
To Next Page
Loading...
Need help?
General