38
Important! Switch the machine off when you:
• e.g. carry out cleaning or maintenance work, or convert the machine to
another function
• store it in a suitable room to avoid any unauthorised use of the unit
• leave it standing without supervision
In addition, you should remove the key from the key-switch and prevent the
machine rolling away ( for example, by placing a wedge under the machine).
Store the machine in a dry, dust-free room with a corrosion-free atmosphere.
The temperature must not fall below +10 °C or exceed +35 °C. Low
temperatures, damp and dust can significantly reduce the service life of the
electrical components.
EU Declaration of Conformity
We
JohnsonDiversey Switzerland
CH-9542 Münchwilen
hereby declare that the product described below both in this basic design and
construction and in the version marketed by us conforms to the relevant safety-
and health-related requirements of the appropriate EU Directive.
This declaration shall cease to be valid if modifications are made to the product
without our approval.
Applicable EU Directives:
Machinery Directive (98/37/EEC) in version 98/79/EEC
EMC (Electro Magnetic Compatibility) (89/336/EEC)
in version 98/13/EEC
Harmonised standards applied:
EN 60335-1:2002+A11:2004+A1:2004 / EN 60335-1/A12:2006-03/
EN 60335-1/A2:2006-08 / EN 60335-2-72:1998+A1:2001/
EN 50366:2003+A1:2006/
EN 55014-1:200+A1:2001+A2:2002 / EN 55014-2:1997+A1:2001/
EN 61000-3-3:2006 / EN 61000-3-3:1995+A1:2001+A2:2005
It is ensured through internal measures that series-production units conform at
all times to the requirements of current EU Directives and relevant standards
The signatories act on behalf of company management and with full power of
attorney.
Overview
1
Operator panel
2
Speed control (drive and reverse)
3
Emergency Stop button
4
Steering and horn
5
Power supply cordfor the internal battery charger
6
Suction hose
7
Running board with safety switch
8
Mounting pedal for squeegee
9
Squeegee
10
Squeegee lock
11
Squeegee holder
12
Manual unlocking of the brake (the button must be held down!)
13
Chargng plug for the external battery charging unit (only for non BMS
machines)
14
Brush unit
15
Adjustment lever for tools
16
Full recovery tank probe
17
Recovery tank
18
Drainage hose
19
Flex tank with dosing cup
20
Half-full level (red line)
21
Max. filling level (red line)
22
Solution supply pipe and filter
23
Dirt sieve
24
Vacuum air filter
25
Maintenance cap
26
Seal for the tank lid
Product: scrubber dryer
Name: swingo XP
Model: CO75XP.2 (24Vdc/1200W)
CO75XP.2X (230-240V~/50-60Hz/1200W)
To Next Page
Loading...
Need help?
General
