32
Batteries
Permissible batteries
Traction batteries are required for the use of this machine (no
starter or device batteries). We recommend the use of pure
traction batteries. Only these batteries guarantee a long ser-
vice life.
Traction batteries are produced as maintenance-free (VRLA)
batteries (Gel). The machine must be adjusted according to
each construction type and manufacturer.
Each battery has a different service life and performance.
Safety measures to be taken when handling the batteries
Insert/remove battery box
In an emergency
• Batteries contain acid. Always wear
safety goggles for the maintenance,
installation and removal of wet-cell
batteries.
• Rinse acid splashes in your eyes or
on your skin with plenty of clear wa-
ter.
Then immediately consult a doctor.
Wash your clothes with water.
• Explosive gas is generated during
battery charging. Keep away from
open fire or glowing embers.
• Do not smoke!
• Danger of acid burns!
• Attention! The battery poles are al-
ways energized. Therefore do not
deposit any objects on the batteries!
Attention:
Keep batteries clean and dry. Immediately
wipe off leaking acid or water (wet-cell bat-
teries).
Wear protective gloves for this purpose.
Attention:
Batteries may only be installed by service
agencies or experts approved by Di-
versey; they must be installed in compli-
ance with the connection diagram.
Installation and/or connection errors may
result in severe injury, explosion and major
damage to the machine and the environ-
ment.
Attention:
The product-safety-data-sheet provided
by the battery manufacturer must also be
observed.
Attention:
The operating instructions provided by the
battery manufacturer must also be ob-
served.
Attention:
Provide adequate ventilation when
charging the battery.
Attention:
The insertion or removal of the battery box
generally may only be carried out by two
people.
Caution:
The insertion or removal of the battery box
generally may only be carried out using a
battery tray (optional).
Attention:
Lifting the battery box can be dangerous
under any circumstances!
The heavy weight of the battery box can
result in injuries to persons or damage to
machines.
• The machine must be switched off (main switch button).
• Wait until the system has shut down and the machine has
been turned off completely.
• The battery box can now be inserted or removed.
Attention:
If there is no battery tray available (option-
al), the insertion and removal of the battery
box may only be carried out by Diversey-
approved customer-service technicians or
specialists.
Caution:
In the event of an emergency (incorrect
functioning of the machine), the battery
disconnection plug must be pulled out.
Please remember that the machine’s en
-
tire electronics could be damaged in the
process.
To Next Page
Loading...
Need help?
General
