TC Electronic Finalizer User Manual

14
MAIN PAGE Input
Set input levels Select
input
Sample Rate:
44.1kHz, 48kHz
or from Digital Input
LowCut Filter
Select between con/pro
analog input levels.
Select the IN section on the Main page by pressing the
BLOCK keys.
These global level controls should be set to optimize the perfor-
mance of the 20 bit A to D converter in the Finalizer.
Basic operation
Press the PARAMETER keys to move the cursor, and turn the
ADJUST wheel to change values.
Left & Right
The input bars can be operated individually or in common.
Highlight both bars for common operation by pressing the
PARAMETER keys. The range of the input bars depends on the
input type (Analog/Digital) and the input level
(Professional/Consumer).
Note: The input bars are always common when digital input is
selected.
Ranges
Analog Inputs
Consumer (-10 dBu): -16 dB to +10 dB
Professional (+6 dBu): -6 dB to +16 dB
Digital Inputs -16 dB to +6 dB
Sample Rate (Srate): Select master clock
44.1 kHz/48 kHz/DI
When Digital Input is selected, the external clock frequency will
be displayed by the three LEDs on the left hand side of the dis-
play. If the Finalizer can not lock, none of the LEDs will be lit.
Note: When changing the input to digital, the sample rate para-
meter is automatically set to DI.
LowCut
The lowcut filter is global, and is used to filter out any sub-bass
frequency or DC contents in the current signal.

TC Electronic Finalizer Specifications

General

Brand	TC Electronic
Model	Finalizer
Category	Computer Hardware
Language	English