TC Electronic Finalizer User Manual

35
Memory Protect
Protect
This parameter sets the memory protection on or off. When pro-
tect is on, the RAM presets between the high and low limits are
write protected.
Memory Backup
Mem > Card
Insert a PC Card in the card slot and press OK. All RAM presets
of the Finalizer will now be backed up to the memory card.
Card > Mem
Insert the PC Card containing your presets and press OK. All
presets will now be stored back into the Finalizer RAM.
Warning:
This action will destroy all existing RAM presets of the Finalizer.
Mem > MIDI
Connect your Finalizer’s MIDI output to another Finalizer, a
sequencer or any other MIDI recording device. Press OK and the
Finalizer will perform a MIDI bulk dump of all RAM presets.
MIDI > Mem
Connect the storing device to the Finalizer’s MIDI input and
press OK. The Finalizer is now ready to receive a MIDI bulk
dump containing RAM presets.
Warning:
This action will destroy all existing RAM presets of the Finalizer.
Pedal Input
Select between: External Fader/Fade up-down/Bypass.
MIDI Out
Channel
MIDI transmit channel.
Prg. Change
Sets whether the Finalizer should transmit MIDI program
changes or not.
Controllers
Sets whether the Finalizer should transmit MIDI control changes
or not.
Offset
This number is added to the outgoing program number.
Security
To security-lock the Finalizer, press OK while this parameter is
selected.
When locked, you will have to dial the PIN-code shown below
to access the Finalizer.
PIN-code
Sets your PIN-code for the security lock by dialing the ADJUST
wheel (See page 36).
If you should forget your PIN-code, please enter the Reset page.
This will release the Finalizer from the locked state.
(You do not have to run any of the reset functions).

TC Electronic Finalizer Specifications

General

Brand	TC Electronic
Model	Finalizer
Category	Computer Hardware
Language	English