TC Electronic Finalizer User Manual

38
TROUBLESHOOTING
You press the POWER switch but there is no light.
- The power switch on the rear panel is switched off.
The input PPM meters don’t peak out.
- You are using analog inputs, but the input selector in the I/O menu is set to digital in.
- The analog input level is set too low.
No sound through the Finalizer
- You are using analog inputs, but the input selector in the I/O menu is set to digital in.
You cannot turn the power off.
- Hold the power switch pressed for at least 3 seconds.

TC Electronic Finalizer Specifications

General

Brand	TC Electronic
Model	Finalizer
Category	Computer Hardware
Language	English