TCL Multimedia Technology Holding CRT BU R&D Center
Chassis Name
NX56-AP&NX56B-AP
Serial No.
Issued on
2008-01-18
Page
Page 5 of 17
Updated on
2009-04-24
Version
4.0
1.4. The adjustment page list an RC key function on P-Mode:
RC key Item Description
0 Screen voltage adjustment Adjust the VG2 voltage
1 Vertical geometry
Vertical geometry
page
2 Horizontal geometry
Horizontal geometry
page
3 White Balance Adjustment
White Balance
page
4 Setup and option page 4
5 Setup and option page 5
6 Setup and option page 6
7 Setup and option page 7
8 Setup and option page 8
FAV
Setup and option page select
Setup and option page 9
9 I2C Bus OFF/ON Press this key to enter or exit BUS OFF mode
DISPLAY Software version Display software version
MENU Close menu or exit the P-Mode
Close the factory menu or return to the previous
menu or exit the P-Mode
RECALL P-Mode hotkey Enter or exit the P-Mode
AT Screen voltage adjustment with AKB Adjust the VG2 voltage