1. Time at current playback position.
2. Current playback position
3. Extent of pause time, representing the amount of time this channel has been buffered, up to 90
minutes.
4. 90 minute mark, representing the maximum extent of pause time.
5. Current time.
The progress bar also displays tick marks at each half hour point, to help you locate
the boundaries where one show ends and a new one begins.
Notes about Live TV Pause
• You can use Live TV Pause only with digital broadcast and cable channels
received through the TV’s ANT input (ATSC and Clear QAM channels).
• Changing channels erases and restarts the Live TV Pause buffer.
• Returning to the Home screen, selecting another input, or turning off the TV
erases and resets the Live TV Pause buffer.
• Removing the USB drive erases the Live TV Pause buffer.
More Ways to Watch (U.S. only)
Only in connected mode in the United States
, More Ways to Watch gives you
recommendations about the shows you’re watching on the Antenna TV, HDMI, or AV
input. You will automatically get these recommendations in the Smart Guide and in
the program information banner for Antenna TV programs. However, before you can
get recommendations for shows you’re watching through the HDMI or AV inputs, you
must opt into the Smart TV experience to acknowledge that you want to allow the TV
to use automatic content recognition (ACR). See Opting in to Smart TV experience
for details.
Not every show provides recommendations. For details about what you’ll see when a
recommendation appears, see Using More Ways to Watch.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
