L2 Repair Document TCL Communication Ltd.
9030G/9030Q/VDF1400
Level 2 Repair Document
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
Scratches (length > 3mm) on any surface, including the front casing, decorate frame, battery
cover, touch Lens, keypad, etc.
5) Distortion
Bend, twisted or crushed on the h/s, cover/casing or connectors, etc.
6) Broken
Touch broken, casing/cover broken, etc.
7) Dropped
Keypad tear off, touch lens, connectors dropped, etc.
8) Gap
External physical damage relating to abnormal use, like front case and frame opened
9) Others
Damage caused by disassembly ,wrong part assembly, loss of components
Use in abnormal environment like high temperature causing plastic melts
2.3 Pretest
1) Check that the SIM card and SD card are set correctly.
2) Power on the tablet.
3) If the tablet asks to input NCK code, this means it is SIM locked and can only be worked with
dedicated SIM card. Use the correct SIM card.
4) Enter the phone code if necessary.
5) If power on, test step by step with the auto test code:
Open “Calculator” application, and input “0x0-0+=” to enter MMI test mode, and then you will
see the interface displaying the SW version. Select “Auto” to start the auto test, or select
“MANU” to do the MMI test manually.
If one of the tests failed during “Auto” test mode, it will display “Failed: xxx, Press „Next‟ to go
on test; Press „RETEST‟ to retest this item; Press „END‟ to Power off.”
Battery Type
I. You can get information about Battery Type.
II. Press “pass” key to continue.
To Next Page
Loading...
Need help?
General
