TCL Alto 8e User Manual

20
Connect with the optical cable
1
Remove the protective caps from the optical cable
when necessary.
2
Connect one end of the optical cable to the optical input
connector on your Sound Bar and another end to the
optical output connector of your TV or device.
5V[L
If there is no sound output from the Sound Bar, try to
activate the PCM signal output on your TV or device.
PCM is used to convert analog audio signals into digital
audio signals in most devices. For more information of
h ow to activate the PCM signal output, check the user
manual of your
TV or device.

TCL Alto 8e Specifications

General

Brand	TCL
Model	Alto 8e
Category	Speaker System
Language	English