13
WPS Switch
Select Enabled to enable the WPS function, and Disabled to disable
it.
Add new device
There are two ways to add a new device, you can choose PIN or
PBC; for details see '2.4 Access CPE network' on page 5.
MAC Filter
Set MAC address filtering mode in the WLAN MAC Filter drop‑down list box.
Ruleless:
Disable the WLAN MAC filter.
White List:
Allow a client to connect to the device using the WLAN if the clients MAC
address exists in the MAC Address list.
Black List:
Deny a client's connection to the device using the WLAN if the clients MAC
address exists in the MAC Address list.
Advanced Settings
Network Mode
The mode is set to 802.11b/g/n by default.
Channel
Bandwidth
You can select from the available options via the drop‑down menu.
This is set to Auto by default.
Country/Region
Code
You can select the appropriate country/region code for your device.
Frequency
(Channel)
Select the appropriate channel to optimise the performance and
coverage of your wireless network. This is set to Auto by default.
DCS
The DCS option for dynamic channel adjustment is only available
when automatic channel is selected.
Voice Settings (For HH40L1 only)
SIP ALG (Session Initialisation Protocol Application Layer Gateways)
This helps the private network terminal equipment under NAT to perform normal data
exchange with the SIP softswitch on the public network, without making any changes. You
can set the port and click Apply to save the setting once the function is enabled.
WB mode
You can switch between broadband and narrowband mode on voice call with this function.
Select Enabled to use broadband for voice call, and select Disabled to use narrowband.
VoLTE APN (Voice over Long-Term Evolution Access Point Name)
VoLTE is a high‑speed wireless communication standard for mobile phones and data
terminals. Its main purpose is to provide a shorter connection waiting time, as well as higher
quality and more natural voice and video call effects. The VoLTE APN is IMS as default.
Digitmap settings
DigitMap is a dial plan that exists in the media gateway to detect and report dial events of the
terminal. When the number dialled conforms to one of the dial plans defined by DigitMap, the
media gateway sends the called number to the core network. If the called number dialled by
To Next Page
Loading...
Need help?
General
