TCL HH40L1 User Manual

6
Option 1: WPS button
1. Press the WPS button on your CPE for 3 seconds.
2. Enable the WPS function of your wireless device within 2 minutes to make a WPS
connection.
Option 2: PBC
1. Log in to the web user interface (UI) of your CPE, and go to Devices settings > Wi‑Fi
settings. (For more information on how to log in to the web UI, see "Chapter 3. Access
the web UI" on page 7.)
2. Choose Enabled for WPS switch, and click Apply.
3. Go to Add new devices and choose PBC; enter the new device information you want to
connect to the CPE. Click Apply.
Option 3: WPS PIN code
1. Log in to the web user interface (UI) of your CPE, and go to Devices settings > Wi‑Fi
settings. (For more information on how to log in to the web UI, see "Chapter 3. Access
the web UI" on page 7.)
2. Choose Enabled for Current PIN switch, and click Apply.
3. Check the PIN code from the Current PIN.
4. Enter the PIN code when the device attempts to connect to the CPE. Click Reset PIN
code to reset the PIN code, you can find the default PIN code from the label located on
the bottom of the device. Click Random PIN code to change the PIN code.
2.5 Use the telephone function (For HH40L1 only)
Your CPE supports telephone functionality. Connect a telephone to your CPE using a
telephone cable as illustrated below.

TCL HH40L1 Specifications

General

Brand	TCL
Model	HH40L1
Category	Network Router
Language	English