2
6. WPS button
Press the button for 3 seconds to enable the WPS function. The WPS
function will be automatically disabled if a WPS connection is not
established within 2 minutes.
7. Wi‑Fi button
Press the button for 3 seconds to disable/enable your CPE Wi‑Fi. This
function is enabled by default.
When this function is disabled, other users cannot detect the SSID or
the Wi‑Fi name.
8. Telephone port
(For HH40L1 only)
Connect a telephone to make or answer calls.
9. LAN/WAN port
For connecting with an internet source or wired devices such as
computers or switches.
10. Power connector For connecting with the power adapter.
11. Power button Press the button to power on/off your device.
12. Reset button Use a paperclip to press the button for 3 seconds to reset the device.
To Next Page
Need help?
General
