2
5. SMS LED
•Blinking blue: there is an unread message.
NOTE Log in to the web UI (see the IP address on the label inside
the router), and locate the SMS tab to read the message.
•OFF: there is no unread message, or the router is in the power saving
mode.
6. Micro USB port
Used to connect to a power supply (5 V/1 A) through the provided USB
cable.
7. Power button
•Press for 3 seconds to power on or off your router.
•Press to recover from the power saving mode.
8. Reset button
Use a paperclip to press the button for 3 seconds to reset the router to
default factory settings, including the Wi-Fi name and password.
9. Micro SIM card
slot
Insert a micro SIM card in the slot.
10. Micro SD card
slot
Insert a micro SD card in the slot. The router works with micro SD
cards with a maximum capacity of 32 GB.
Power saving mode
If you do not use the router buttons for three minutes, all LEDs will automatically turn off.
To Next Page
Loading...
Need help?
General
