4
Chapter 2. Make connections
Enjoy music and hands-free calling with your earbuds by using the Bluetooth function of your
device.
Connect with a Bluetooth device
Pair your Bluetooth device to use it with the earbuds for the first time. Before you make the
pairing operation, make sure your earbuds and the charging case are charged sufficiently.
To pair the earbuds with your device for the first time after purchase or after resetting the
earbuds, follow these steps:
1. Take out your earbuds from the charging case, and keep them next to your device. The
earbud LED indicators flash in blinking white.
2. Unlock your device, and turn on the Bluetooth function on your device.
3. Select
TCL MOVEAUDIO S108
from the list of available devices to complete the
connection.
90%
TCL MOVEAUDIO S108
NOTES
•When you pair the earbuds with a device for the first time after purchase or after
resetting the earbuds, the earbuds will enter pairing mode automatically if taken out
of the charging case.
•If pairing is not established within 5 minutes, the pairing mode will be cancelled and
the earbuds will turn off.
To pair the earbuds with your device manually, you have the following options.
Option 1
1. Remove both earbuds from the charging case, and wear the earbuds.
2. Disconnect the earbuds from your paired device, and the earbuds will enter pairing mode.
3. Unlock your unpaired device, and turn on the Bluetooth function.
4. Select
TCL MOVEAUDIO S108
from the list of available devices to complete the
connection.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
