106
Not Valid
• The function you have tried to use is not available
with the current settings. Check the steps and
settings.
Operate via App
• Operation from the unit or remote control is not
available.
• Use the connected device or application for
operating.
PGM Full
• The number of programed tracks is more than 24.
Please Wait
• This is displayed, for example, when this unit is
turned to standby/on. (For up to approx. 1 minute
and 30 seconds)
Reading
• The unit is checking the CD information. After this
display has disappeared, start operating.
“Remote
” (“ ” stands for a number.)
• The remote control and this unit are using
different modes.
Change the mode on the remote control. (⇒ 19)
Searching
• The unit is checking the media server on the
network.
This track is not available.
• Some content may not be available on the music
streaming service, etc.
Unlocked
• “PC”, “OPT” or “COAX” is selected, but no device
is connected. Check the connection with the
device. (⇒ 50, 52)
• The sampling frequency components, etc. of the
audio signals are not input correctly.
For supported formats, refer to “File format”
(⇒ 116)
USB Over Current
• USB device is drawing too much power.
Disconnect the USB device and turn the unit to
standby and on again. (⇒ 46)
Wi-Fi Setup
• Select “Yes” and press [OK] to enter the network
setting. (⇒ 29)
To exit the network setting, select “No” and
press [OK].
To Next Page
Loading...
Need help?
General
