Technics SA-EX700 User Manual

Recording on the VCR (VCR 1) (continued)
For SA EX500 !
if a TV is connected to the “TV/VCR 2" terminals, you can record off
it.
1 2
Be sure to set the TV/VIDEO mode on the TV to “TV".
Press TV/VCR 2 (input select
button).
Recording from a second VCR (VCR 2)
or laser disc player (VDP)
|For SA-F-X7Q0.
You can record from a camcorder or other video sources by con¬
necting the source to the “VCR2” terminals on the front and "VDP"
terminals on the rear of the receiver.
For SA-EX500-
If a second VCR or laser disc player is connected to the ‘TV/VCR 2"
terminals, you can record off it.
Camcorder, etc.
(not included)
To watch the picture you are recording into VCR 1, set the TV to
the VIDEO mode.
Select the TV channel.
Press TV/VCR 2 (Input select
button).
Begin recording on the VCR 1.
Follow your VCR’s operating instruc¬
tions.
W
SA-EX700 only
TV/VCR 2
a. TV-. VCR 2
(Only if you pressed TV/VCR2 in the
above step)
Set TV/VCR 2 ( jlTV VCR 2)
to “-.VCR 2” position.
/_ lj t _ / / r
/ /T / // /_
/ /
ITC
Begin recording on the VCR 1.
Follow your VCR's operating instructions.
Begin playback the tape on
the second VCR or laser disc
player.

Technics SA-EX700 Specifications

General

Brand	Technics
Model	SA-EX700
Category	Stereo Receiver
Language	English