Technics SC-CH404 User Manual

Press TUNER/BAND to select
FM or MW or LW.
Each time you press TUNER/BAND,
“FM”, “MW”, "LW” wiil be displayed In
order.
3
Press A or T to tune Into the
desired broadcast.
The display will show the frequency
which you selected.
g
Press ◄ or ► to select the de¬
sired preset channel.
The selected preset channel will appear
on the display.
SwiSuw .vomwi ytienw im.
7 SB IS -
Preset channel
Adjust the volume as you like
on the amplifier.
FM MODE
If noise is excessive In the FM
mode:
Press FM MODE on the remote control.
The sound will then be heard in monau¬
ral. If the broadcast signal is weak, or if
there is a large amount of interference,
you will get a clearer sound using FM
MODE.
MW allocation settings:
This unit comes equipped with an electronic digital tuner that divides
the broadcast band into many small steps. These steps match the
assignable broadcast frequencies and intervals in between.
Each country allocates (assigns) broadcast bands according to their
particular needs.
By adjusting the allocation, you can enable this tuner to receive MW
broadcasts allocated in 10 kHz steps.
1. Press TUNER/BAND to select MW.
2. Press and hold TUNER/BAND for approximately 4 seconds.
To return to the original frequency indication, repeat steps 1 and 2.

Technics SC-CH404 Specifications

General

Brand	Technics
Model	SC-CH404
Category	Stereo System
Language	English