Technics SC-CH404 User Manual

g to compact discs
Program play
(Available only from the remote control)
This function allows you to program up to 24 tracks on a disc in any
order you choose.
This example shows how to program tracks 3, 5 and 7, in sequence.
Y co
Press CD.
^ PROGRAM
Z Q
Press PROGRAM,
PROGRAM
1
1
Lights.
To select a two-digit track:
Press >10.
For example:
Track no. 13: £101 -> 3
Track no. 20: 210 2 -> 0
Track no. 35: 21 0 3 5
To add an entry:
Press the numeric button corresponding to the track to be added.
When "FULL” appears on the display:
The number of programmed tracks Is limited to 24. No further tracks
can be programmed.
Press the numeric button to
select the track you want to
play in the desired sequence.
Programmed order
Programmed
track number
Total playing time
of the programmed tracks
Press ► .
PROGRAM
To cancel program play:
Press PROGRAM.
When “—:—” appears on the display:
The total playing time of the programmed tracks has exceeded
99 minutes 59 seconds, or you programmed tracks numbering
higher than 24. However, programming and play are still possible.
To clear a programmed track one by one:
(Using the numeric buttons)
1. Press CANCEL.
CANCEL indicator will light.
2. Press the numeric button of the track you want to cancel.
3. Press CANCEL
CANCEL indicator will go out.
(Using Morw buttons on the remote control)
1. Press CANCEL.
CANCEL indicator will light.
2. Press w-* or repeatedly until the display shows the track
number you want to cancel.
3. (Within 4 seconds) Press CANCEL.
CANCEL indicator will go out.
To clear all tracks:
Press ■ once in the stop mode or twice in the play mode.
The compact disc player resumes sequential play mode.
23

Technics SC-CH404 Specifications

General

Brand	Technics
Model	SC-CH404
Category	Stereo System
Language	English