Technics SC-CH730 User Manual

To use headphones
Connect the headphones to the headphones jack.
Before connecting, reduce the volume level.
PHONES Amplifier
SG
Avoid listening for prolonged periods of time to prevent hearing
damage.
Plug type: Stereo mini type
Listening to an external source
Tuner/sound processor
The following example in the figure shows when you select analog
player.
When you play the unit which is connected to the “EXTERNAL”
terminal, select “EXT”.
I SELECTOR
Press SELECTOR to select
“PHONO”,
Each time you press SELECTOR, sound
sources will be switched as follows.
TUNER->CD->TAPE—EXT
t 1
PHONO<——VDP+——_-VCR
2 Operate the unit which is con-
nected to the system.
See the instruction manual of the unit
concerned for the operation.
Cassette deck
Ey
The following example in the figure shows when you record from an
analog player.
When you play the unit which is connected to the “EXTERNAL”
terminal, select “EXT”.
Press REC PAUSE to put the
cassette deck into the record-
ing standby mode.
Press SELECTOR on_ the
tuner/sound processor to se-
lect “PHONO”.
3 C=] =) Press <] or > to start record-
ing.
4 Start playing the source to be
recorded.
See the instruction manual of the unit
concerned for the operation.
To stop recording:
Press QO.
To briefly interrupt recording:
Press REC PAUSE.
The cassette deck will go into the recording standby mode.
To resume recording:
Press <j or > corresponding to the direction in which recording is
taking place. ;
Recording on an external unit
Start recording on an externai unit, and then start playing the source
to be recorded.
© You cannot record the sound with the equalization curve. simulated
listening environment, and V. BASS effect on an external unit.
© Do not press KARAOKE when recording on an external unit.

Technics SC-CH730 Specifications

General

Brand	Technics
Model	SC-CH730
Category	Stereo System
Language	English