Technics SL-MC60 User Manual

Disc grouping play
With disc grouping play, you can register discs into any of the five
available groups (A-E) and then play back only the discs in a spe¬
cific group.
• The same disc can be registered in as many groups as you like.
• Each group can hold up to 60 discs.
• You can name each group.
To make groups
[During sequential play or while it is on stop]
Select a disc.
To select a disc from 1 to 9
For example: "6"
IDISCI -» | 6 1
To select discs from 10 to 60
For example: "19"
(He] -* CO-ED
Push the button within 7 seconds each other.
■ 8
3
a-.
§
You cannot select slot No. 0.
For your reference
You can select discs with the DISC SKIP - and + buttons.
[Within 7 seconds]
Press GROUP ENTER.
[Within 7 seconds]
Press the DISC GROUPING PLAY button you want.
(This input the disc in the group.)
For example: To input disc in group A.
Press [A].
Repeat steps 1, 2 and 3 until you have completed
all items.
To cancel disc grouping play mode
I In the stop mode]
Press the DISC GROUPING PLAY button indicated on
the display.
(The group indication on the display will go out.)
For your reference
The group contents will remain stored in memory even after the
unit is switched off.
However, if the power cord is unplugged or the power supply is
otherwise interrupted for an extended length of time, the contents
will be erased from memory.

Technics SL-MC60 Specifications

General

Brand	Technics
Model	SL-MC60
Category	CD Player
Language	English

Summary

Safety Precautions

Critical Safety Warnings

Essential warnings regarding laser safety, electric shock, and product exposure to moisture.

Getting Started

Pre-Operation Guidelines

Covers power, installation, environment, placement, maintenance, and service advice.

Product Controls

Front Panel Overview

Detailed explanation of the function of each control and display on the front panel.

Disc Management

Loading and Unloading CDs

Step-by-step instructions for safely inserting and removing discs from the changer.

Basic Operations

Sequential Playback

Direct Disc/Track Selection

Methods to directly access and play a specific disc or track number.

Program Play

Programming Tracks

Guide to creating custom playback sequences of up to 32 tracks.

Managing Programmed Content

Direct Programming

Adding Current Track to Program

Random Playback

One Disc and Full Random Modes

Troubleshooting

Problem Solving Guide

Identifies common issues and provides suggested solutions for the changer.

Service and Specifications

Product Service and Technical Details